REFERENCE
Additional information is available in the following reference forms:
•Technical Guide - DJ150,
•General Installation - DJ150,
•
•Economizer Accessory -
Downflow Factory Installed,
Downflow Field Installed,
Horizontal Field Installed,
•Motorized Outdoor Air Damper
•Manual Outdoor Air Damper
•Manual Outdoor Air Damper
•Gas Heat Propane Conversion Kit
•Gas Heat High Altitude Kit (Natural Gas)
•Gas Heat High Altitude Kit (Propane)
•
•Electric Heater Accessory
•Unit Renewal Parts List
All forms referenced in this instruction may be ordered from:
Standard Register
Toll Free Fax: (877)
Toll Free Phone: (877) 318-9675
APPROVALS
Design certified by CSA as follows:
1.For use as a cooling only unit, cooling unit with supple- mental electric heat or a forced air furnace.
2.For outdoor installation only.
3.For installation on combustible material and may be installed directly on combustible flooring or, in the U.S., on wood flooring or Class A, Class B or Class C roof cov- ering materials.
4.For use with natural gas (convertible to LP with kit).
This product must be installed in strict compliance with the enclosed installation instructions and any applicable local, state, and national codes including, but not limited to, building, electrical, and mechanical codes.
Incorrect installation may create a condition where the operation of the product could cause personal injury or property damage.
RENEWAL PARTS
Refer to York’s USER’S MAINTENANCE and SERVICE INFORMATION MANUAL Part Number
The installer should pay particular attention to the words: NOTE, CAUTION, and WARNING. NOTES are intended to clarify or make the installation easier. CAUTIONS are given to prevent equipment damage. WARNINGS are given to alert installer that personal injury and/or equipment damage may result if installation procedure is not handled properly.
Unitary Products Group | 5 |
