Zebra Technologies H 2824-Z Hooking Up the Printer and Computer, Interface Cable Requirements

Getting Started

Hooking Up the Printer and Computer

Hooking Up the Printer and Computer

Your printer will have one of these combinations of interfaces:

•Parallel

•Universal Serial Bus (USB) and DB-9 serial

•Ethernet and RJ-11 serial

Each specific interface option—USB, parallel, ethernet, serial—is discussed individually. You must supply the required interface cable for your application.

Caution • Keep the power switch in the OFF position when attaching the interface cable. The power supply barrel connector must be inserted into the power supply receptacle on the back of the printer before connecting or disconnecting the communications cables.

.

Important • This printer complies with FCC “Rules and Regulations,” Part 15, for Class B Equipment, using fully shielded six-foot data cables. Use of longer cables or unshielded cables may increase radiated emissions above the Class B limits.

Interface Cable Requirements

Data cables must be of fully shielded construction and fitted with metal or metalized connector shells. Shielded cables and connectors are required to prevent radiation and reception of electrical noise.

To minimize electrical noise pickup in the cable:

Keep data cables as short as possible (6’ [1.83 m] recommended). Do not tightly bundle the data cables with power cords.

Do not tie the data cables to power wire conduits.

USB Interface Requirements

Universal Serial Bus (version 1.1) provides a high-speed interface that is compatible with your existing PC hardware. USB’s “plug and play” design makes installation easy. Multiple printers can share a single USB port/hub.

Parallel Interface Requirements

The required cable (IEEE 1284-compliant is recommended) must have a standard 36-pin parallel connector on one end, which is plugged into the parallel port located on the back of the printer. The other end of the parallel interface cable connects to the printer connector at the host computer.

For pinout information, refer to Parallel Interface on page 56.

24 LP 2824-Z User Guide 980531-001 A