Zebra Technologies P320i user manual Cleaning the Print Head

Card

Printer

Solutions

P320i Plastic Card Printer

General information

Getting started

Operation

Printing a card

Cleaning Troubleshooting

Specifications

Appendix A

Appendix B

Appendix C

CLEANING THE PRINT HEAD

A cleaning using the Cleaning Cards usually suffices. However, a separate Print Head cleaning using swabs can remove more stubborn deposits when print anomalies persist. To avoid deposits, only use foam-tipped swabs.

1.Turn power OFF. Raise Print Head and remove the Ribbon.

2.Clean Print Head by moving alcohol- moistened swab tip side-to-side across Print Head elements. Only use moderate force. (To reorder swabs see Appendix C).

3.Turn power ON. Allow two minutes for the print head components to dry before resume printing.

Never use a sharp object to scrape deposites from the print head. Permanent damage will result.