Card
Printer
Solutions
General information
Getting started
Operation
Printing a card
Cleaning
Troubleshooting
Specifications
Appendix A
Appendix B
Appendix C
P320i Plastic Card Printer
A - MEDIA LOADING ORIENTATION
Position the cards with the Smart Card Chip at the top of the card and towards the printer.
B - SMART CARD CONTACT STATION INTERFACE
When a command to the parallel printer interface sends a card to the Smart Card Contact Station, the printer connects the Smart Card Contact Station to the female
An attached external Smart Card Programmer can be used to program Smart Card chips.
DB - 9 | SMART CARD | DB - 9 | SMART CARD |
PINS | CONTACT POINTS | PINS | CONTACT POINTS |
1 | CI (VCC) | 6 | C6 (Vpp) |
2 | C2 (Reset) | 7 | C7 (I/O) |
3 | C3 (Clock) | 8 | C8 (RFU) |
4 | C4 (RFU) |
|
|
5 | C5 (GND) | 9 | (GND when chip is at station) |
|
| ||
|
|
|
|
|
|
|
|
Refer to the Card Printer Programmer’s Manual for complete programming information.
DO NOT position printing over the Smart Card Chip.
