Navigate to Properties by following this sequence:
Start > Printers (or Printers and Faxes) > Right click Zebra P640i > Properties
Most of the tabs on the Properties screen (General, Sharing, etc.) are of the “set and forget” variety, page
Caution • Some of the sub menus under Device Settings are specific to the Print station, Mag encoder, and Laminator.
Refer to the relevant Tech Notes section.
| Device Settings | Status | |
|
|
|
|
|
|
|
|
Start > Printers (or Printers and Faxes) > Right click Zebra P640i > Properties > Device Settings > Status
Navigate to Properties by following this sequence: Start > Printers (or Printers and Faxes) > Right click Zebra P640i > Properties
Most of the tabs on the Properties screen (General, Sharing, etc.) are of the “set and forget” variety, page
Caution • Some of the sub menus under Device Settings are specific to the Print station, Mag encoder, and Laminator.
Refer to the relevant Tech Notes section.
Device Settings | Status |
Start > Printers (or Printers and Faxes) > Right click Zebra P640i > Properties > Device Settings > Status
Print Jobs
The number of the print job that is currently being processed. Next is meaningful only when the printer is not being driven by a PC. If the printer is being driven by a PC, the PC sets the job number to be the same as the
Error Conditions: Normally, this displays “No Error”.
Images Left: The exact number of YMCK sets remaining on the color ribbon, as reported by the color ribbon core.
Enabled Features:
Uv Printing is enabled in manufacture, or by field technician.
ID/Code (the user password) is enabled by the user.
ID/Key requires installation of a physical key. This displays “Yes” once the printer has locked itself to the key, not just because it has the key installed.
Advanced: Click the Advanced button to display
Sensor Data, below.
(Another way to display this screen is through this sequence, see page
Sensor Data)
P640i Card Printer User Guide | 65 |