Sensor Data

Ribbon sensors: see Tech Note TN4 Print Station

Laminate sensors: see Tech Note TN6 Laminator

Card presence sensor: see Tech Note TN2 Card Transport

Printhead temperature: see Tech Note TN4 Print Station

AC frequency, Assumed AC voltage: see

Tech Note TN6 Laminator (Laminate Station Adjust)

Temperatures: see page TN8-5

Logic states : see page TN8-5

Device Settings

Control

Start > Printers (or Printers and Faxes) > Right click Zebra P640i > Properties > Device Settings > Control

T h e s e b ut t o n s m i m i c t h e f r o nt panel buttons

Prints a data summary card, below, generated by the driver (this is not the test card printed

Run Clean Cycle: Decontaminates the card cleaning roller by activating the cleaning cassette. One clean cycle per click.

Clear Error: This clears error reporting on the screen (but note that the underlying cause of the error may still be present).

Reprint Last Card: This reprints the last card printed, as many times as specified in the Copies box.

Zero Buffer Count: Click Receive or Print as desired to set the related buffer to zero (if no job is in process, the buffer values will already be zero).

Start > Printers (or Printers and Faxes) > Right click Zebra P640i > Properties > Device Settings > Control

>Advanced Utilities

Flip Test 1: see Tech Notes TN5 Flip Station

Flip Test 2: see Tech Notes TN5 Flip Station

Flip Test 3: see Tech Notes TN5 Flip Station

Eject Card: see Tech Notes TN5 Flip Station

Flip/Pause: see Tech Notes TN5 Flip Station

Move Truck: see Tech Notes TN2 Card Transport

Mag Position Adjust: see Tech Notes TN3 Magnetic Encoder

Mag Amplitude Adjust: see Tech Notes TN3 Magnetic Encoder

Flip Station Calibration: see Tech Notes TN5 Flip Station

Show Sensor Data: Click to display Sensor Data, below

Also available through the Status screen (Device Settings > Status > Advanced )

66

P640i Card Printer User Guide

980541-001 Rev. A