Zebra Technologies PA400, PT400 Introduction, Hello, Unpacking and Inspection

Introduction

Hello!

Thank you for choosing our Zebra Portable Printer. Don’t let its size fool you - this rugged little printer is sure to become a productive and efficient addition to your workplace. And it’s no wonder, because it’s made by Zebra Technologies Corporation - your number one source for bar code printers, software, and supplies!

•This user’s guide gives you all the information you’ll need to operate the printer.

•To create and print label formats, take a look at the ZPL II Programming Guide (part #46530L) for information about Zebra’s label design programming language, better known as “ZPL II.” If one was not ordered with your printer, simply call your reseller or Zebra Technologies Corporation or visit the Zebra web site . If you’d like to use a different label preparation software, contact your reseller or Zebra for advice and information.

•The PA400/PT400 Maintenance Manual (part #505142L) contains all the information you’ll need to properly maintain the printer.

Unpacking and Inspection

Inspect the printer for possible shipping damage:

•Check all exterior surfaces for damage.

•Raise the media access door (refer to “Loading the Media” in Getting Ready to Print) and inspect the media compartment for damage.

In case shipping is required, save the carton and all packing material.

Reporting Damage

If you discover shipping damage:

•Immediately notify and file a damage report with the shipping company. Zebra Technologies Corporation is not responsible for any damage incurred during shipment of the printer and will not cover the repair of this damage under its warranty policy.

•Keep the carton and all packing material for inspection.

•Notify your authorized Zebra reseller.