Label Specifications

Label/Tag Width

1” to 4.25” (25.4 mm to 108 mm)

 

 

 

Fanfold Width

3.5” to 4.25” (89 mm to 108 mm)

 

 

 

Label/Tag Length

0.5” to 10” (12.7 mm to 254 mm)

 

 

 

Interlabel Gap

.08” to .16” (.12” preferred)

2 mm to 4 mm (3 mm preferred)

 

 

 

 

 

Label/Tag Thickness

.0030” to .0106” (.076 mm to .269 mm)

 

 

 

 

Max. Outer

2.1” (53.3 mm)

Label Roll

Diameter

 

Size

 

 

Inner Core

1” (25.4 mm)

 

 

 

 

 

 

Use Zebra-brand direct thermal or thermal transfer roll

 

 

media that is outside wound. Media may be reflective

 

 

(black mark) sensing or transmissive sensing, die-cut,

 

 

notched, or continuous.

 

 

For die-cut labels, use only full auto dies.

 

 

Notched media must have a 0.5” (12.7 mm) wide x 0.094”

 

 

(2.4 mm) long cutout located in the center of the roll. The

Media Requirements

reflective media black marks must be located in the center

 

 

of the roll.

 

 

Minimum Black Mark Dimensions:

 

 

Mark width: 0.5” (12.7 mm) perpendicular to the edge of

 

 

the media.

 

 

Mark length: 0.094” (2.4 mm) parallel to the edge of the

 

 

media.

 

 

 

Memory/Communications Specifications

ROM Memory

8 megabit flash (512 kilobyte x 16 data bit width)

 

 

RAM Memory

4 megabit DRAM (256 kilobyte x 16 data bit width)

 

 

Communications

RS-232 serial port (RJ45 connector)

 

 

42