10.Close the printhead and the top cover.
11.Swing up the media access door, ensuring that the media liner is threaded through the wide slot in the media access door (refer to Figure 10).
12.Lift to hook the top of the media access door over the top cover.
13.Push in the bottom of the media access door to close.
14.Turn on the printer or press the Feed button if the printer is already on.
NOTES: To ensure optimal print quality, make sure that the backing material is flush against the peel bar (as shown in Figure 10). If it starts to “loop” away from the peel bar, gently pull down on the backing material.
With certain types of media, it may be necessary to reduce the print speed to 1.5” (38.1 mm) per second to produce consistent peel operation. Consult your authorized Zebra reseller for advice and information.
Label
Backing
Material
Wide Slot
Figure 10
12