•Close the top cover and media access door. Then, press the Feed button to resume printing.
The media is out.•Load a roll of media, following the instructions in “Loading the Media” in Getting Ready to Print. Then, press the Feed button to resume priting.
The ribbon is out (PT400 only).•Load the ribbon, following the instructions in “Loading the Ribbon” in Getting Ready to Print. Then, press the Feed button to resume printing.
The head open sensor plate is dirty.•Clean the head open sensor plate according to the instructions in Preventive Maintenance.
3. The printer is paused.•Press the Feed button to resume printing.
4. The printhead is under temperature.•Continue printing while the printhead reaches the correct operating temperature.
5. The printhead is over temperature.•Printing automatically stops until the printhead cools to an acceptable printing temperature; then, the printer automatically resumes operation.
The battery is over temperature.•Printing automatically stops until the printer and battery cool to an acceptable operating temperature; then, the printer automatically resumes operation.
6. The battery is under voltage (level 1).•Wait until the current label finishes printing, then plug the battery charger into the printer (you don’t have to turn off the printer to do this).
34