English

 

Français

 

 

8. Operation

8. Fonctionnement

 

 

 

 

 

OP1

OP2

OP3

(A) (B)

(C)1

2

OP4

This product is specially designed for nylon head usage.

BALANCE UNIT

1.Put on strap and attach unit to strap.

2.Slide clamp up or down until unit balances with head just touching the ground. (OP1)

You could (aprox. 10 – 30cm) apart the unit from the ground when using saw blade so that you feel easy of the machine.

STARTING ENGINE

WARNING

The cutting head will start rotating upon the engine starts.

1.Rest the unit on a flat, firm place. Keep the cutting head off the ground and clear of surrounding objects as it will start rotating upon starting of the engine.

2.Push the primer pump several times until overflown fuel flows out in the clear tube. (OP2)

3.Move the choke lever to the closed position. (OP2)

(1)choke lever

(2)close

(3)open

(4)primer pump

4.While pulling the throttle lever (OP3,1,2), set the ignition switch to the “I (START)” position and release the throttle. Then the throttle lever is in to the “start position”. (OP3)

(A)stop

(B)start

(C)ignition switch

5.While holding the unit firmly, pull out the starter rope quickly until engine fires. (OP4)

IMPORTANT

Avoid pulling the rope to its end or returning it by releasing the knob. Such actions can cause starter failures.

6.Move the choke lever downward to open the choke. And restart the engine.

Ce produit a été conçu pour être exclusivement utilisé avec une tête en nylon.

EQUILIBRAGE DE LA MACHINE

1.Mettre le harnais sur l’épaule et y accrocher la débroussailleuse.

2.Faire glisser le collier vers le haut ou vers le haut jusqu'à ce que la tête de l'appareil soit droite au niveau du sol (OP1).

On peut relever la machine du sol pour une utilisation plus facile (d’environ 10 à 30 cm) lorsqu’on utilise la lame de tonte.

MISE EN MARCHE DU MOTEUR

AVERTISSEMENT

Faire attention que la lame de coupe se mette à tourner dès que le moteur démarre.

1.Poser la machine dans un endroit plat et ferme. Ne pas poser la tête de coupe sur le sol et dégager tout objet pouvant être projeté par la lame qui se met à tourner dès que le moteur démarre.

2.Appuyer plusieurs fois sur la pompe d’amorçage jusqu’à ce que de l’essence s’écoule par le tuyau de trop- plein (OP2).

3.Placer le starter en position fermée (OP2).

(1)levier du starter

(2)fermé

(3)ouvert

(4)Pompe d’amorçage

4.Tout en ramenant la manette de commande des gaz vers vous, commutez l’interrupteur d’allumage en position “I (START)”, puis relâchez la manette.Puis positionnez la manette des gaz en “position de démarrage”. (OP3)

(A)Arrêt

(B)Marche

(C)Interrupteur d’allumage

5.Tout en maintenant fermement la machine, tirer la poignée de démarrage (OP4).

IMPORTANT

Eviter de tirer à fond sur la corde de démarrage ou de relâcher brutalement

32

Page 32
Image 32
Zenoah TR2000, BC2001 manual Operation Fonctionnement, OP1 OP2 OP3 OP4

BC2001, TR2000 specifications

The Zenoah TR2000 and BC2001 are two prominent models in the realm of outdoor power equipment, renowned for their advanced technologies and efficient performance. These products are engineered for both professional landscapers and passionate gardeners, offering a balanced blend of power, durability, and ease of use.

The TR2000 is recognized for its robust engine design, incorporating a powerful two-stroke engine that delivers exceptional torque and performance. This model features an innovative air filtration system that minimizes the amount of dust and debris that enter the engine, promoting longevity and reliability. The lightweight frame enhances maneuverability, making it ideal for various applications, from trimming hedges to shaping larger topiaries.

On the other hand, the BC2001 showcases a versatile design, suitable for both grass cutting and brush clearing tasks. It is equipped with a high-efficiency cutting system that enables users to tackle dense vegetation effortlessly. The BC2001’s ergonomic handle design reduces operator fatigue, allowing prolonged usage without discomfort. Its adjustable harness ensures proper weight distribution, enhancing control and stability during operation.

Both models employ Zenoah’s signature G-Force Engine Technology, which optimizes fuel efficiency while reducing harmful emissions. This technology not only meets strict environmental regulations but also provides a cost-effective solution for users, as it minimizes fuel consumption over time.

Moreover, the TR2000 and BC2001 feature an easy-start mechanism that reduces the effort needed for ignition, making them accessible for users of all skill levels. Maintenance is simplified through user-friendly designs that allow for easy access to key components, ensuring that these machines stay in prime working condition with minimal downtime.

The build quality of the Zenoah models reflects a commitment to durability, utilizing high-grade materials that endure the rigors of outdoor use. Both the TR2000 and BC2001 are backed by a solid warranty, further emphasizing Zenoah's confidence in their products.

In conclusion, the Zenoah TR2000 and BC2001 stand out in the competitive landscape of outdoor power tools. With their combination of advanced technology, ergonomic design, and robust performance, these models cater to a wide array of users seeking reliability and efficiency in their gardening and landscaping tasks. Whether tackling simple yard maintenance or complex landscaping projects, these machines are engineered to meet the demands of every user.