Zhone Technologies Network Device manual

Zhone Technologies, Inc. IMACS Product Book, Version 4

892160 Interface Card is the same as the 892060 Interface card with the exception of the modem and can be used with the 880060, 880160 and 880460 CPU cards.

The 892260 Interface Card is similar to the 892460 except there is an external synchronization option, no node port and the DB-9 serial port is a DTE-male type. The external synchronization option is for support of up to 8 T1 Framed or E1 Unframed signals and this card can be used with the 880260 and 880360 CPU cards.

The 892360 Interface Card supports eight T1 or E1 WAN links, via a 50-pin AMP connector. The card has 128KB of NVRAM, a DB9 serial port for network management and three RJ48 jacks that connect to the modem, nodal port and VT-100 control terminal port.

The 892460 Interface Card supports the same functionality as the 892360 Interface card except that it has no internal modem port. It requires an 880360 CPU and 5.X.Y CPU firmware.

The 892560 Interface card supports one or two T1 or E1 WAN links via 2 RJ-48 jacks and includes a single RJ-48 jack for a VT100 control terminal. Additionally, two sets of Bantam jacks are available for monitoring each WAN. This interface card does not support WAN redundancy.

The 892660 Interface card supports one or two T1 or E1 WAN links via 2 RJ-48 jacks. The 892660 includes a single RJ-48 jack for a VT100 control terminal, an RJ11 port for an internal 2400 bps, and a DB9 port. Additionally, two sets of Bantam jacks are available for monitoring each WAN. This interface card does not support WAN redundancy.

The 892760 Interface card supports two E1 WAN links via 2 BNC connectors. The 892760 includes a single RJ-48 jack for a VT100 control terminal, an RS 485 Node Port and a DB9 port. Table 8 provides a detailed list of the Interface Cards’ specifications.

March 2001 Page 25