Zhone Technologies Network Device manual Imacs BRI Card In a Leased Line or Idsl Application

Models: Network Device

1 114
Download 114 pages 15.18 Kb
Page 62
Image 62

Zhone Technologies, Inc.

IMACS Product Book, Version 4

 

 

The two transmission protocol supports switched connectivity to ISDN capable switches and D channel signaling on either a full DS0 or multiplexed 4:1 on a single DS0. The ability to multiplex 4 channels onto one DS0 allows for more efficient provisioning. The 826361 and 826461 cards only support 3 DS0s at this time.

Another application of the BRI card is for leased line, or IDSL (ISDN Digital Subscriber Loop) as shown in Figure

18.This allows for a DDS type circuit, with 2 * 64 kbps bearer channels over a single wire pair. The leased circuit can be any standard 2B1Q (U interface) NTU device that supports “nailed-up” (1 or 2B channels) connections and no D channel signaling for the 826070, 826171, and 826270 cards. The 826361 and 826461 cards support a standard non-direct OS/NE communication scheme or multipoint eoc (mp-eoc). The mp-eoc is used for sending operations messages between the ISDN switch and NE line units.

The requirements are specified in TR-829. The performance monitoring portion of this specification will not be implemented. For the 3-DS0 TDM, the overhead bits are transported between the LUNT and LULT as described in TR-397, and for the 4:1 TDM, this is done in a proprietary format. This allows continued customer deployment of D4 equipment as shown in Figure 17.

Leased Line or IDSL (2B1Q)

DTE 2B1Q

NTU

IMACS

IMACS

 

T1/E1 carrier

 

Network

2B1Q DTE NTU

Figure 17 - IMACS BRI Card In A Leased Line or IDSL Application

N T 1

N T 1

 

 

 

C e n t r a l O f f i c e

 

 

 

T 1

I M A C S

w i t h

D 4 C h a n n e l B a n k

B R I T E

c a r d

I S D N

 

 

 

 

 

 

S w i t c h

 

 

 

T 1

I M A C S

w i t h

 

B R I T E

c a r d

 

Figure 18 - Use of Legacy D4 Equipment Application

BRI Card Models

In both cases, leased line and BRITE, B channels carrying voice traffic on the BRI card can be compressed through the ADPCM card to extend the user’s Servers. The only limitation on BRI traffic is that NTUs or NT1s must be located less than 18,000 feet from the system unit.

March 2001

Page 58

Page 62
Image 62
Zhone Technologies Network Device manual Imacs BRI Card In a Leased Line or Idsl Application, BRI Card Models