Zhone Technologies Network Device manual Dial Capability, Performance Statistics

Zhone Technologies, Inc. IMACS Product Book, Version 4

Table 14 describes the various high-speed data cards.

Table 14—820260, 820360, 821260, 821360, 821460, 821560, 821570 and 821660 High-speed Data Cards

	Model Number	Number of	Physical Interfaces	Electrical Interfaces
		Data Ports
	Model 820260	2	2 female 25-pin DB25 D-connectors	ITU-T V.35, RS232,
				RS530/RS449
	Model 820360	2	DB25 female connectors	ITU-T V.11, RS 530
	Model 821260	2	2 female 25-pin DB25 D-connectors	ITU-T V.35 (True V.35)
	Model 821360	2	2 female 26-pin DB26 D-connectors	ITU-T V.35, V.25bis, RS366,
			2 DB15 female connectors	RS530
				(V25 bis and/or RS-366 dialing
				when used with 8840 PRI Card)
	Model 821460	2	2 female 25-pin DB26 D-connectors	ITU -T V.35 (True V.35),
	Model 821560	4	4 female 26-pin DB26 D-connectors	RS530, RS-232, V.35 devices
	Model 821570 (improved
	clock jitter performance)
	Model 821660	4 female DB26 connectors RS530, RS-232 and True V.35 devices
		Nx56K and Nx64K where N=1 to 31 (up to 1984 Kbps)-Software Configurable
		by port
	Data Format	Synchronous
	Data Protocol	Transparent
	Transmit Clock per	Internal or external (software configurable)
	Port
	Clock Polarity per Port	Normal or inverted (software configurable)
	Data Polarity per Port	Normal or inverted (software configurable)
	Dial Capability	Model 8213 only when used with 8840 PRI Server Card
	Number of Dialing	2
	Ports
	Dialing Electrical	EIA RS-366, ITU-T V.25 bis
	Interface
	Dialing Physical	2 female 15-pin D-connectors
	Interface
	Performance Statistics	Errored Seconds, Unavailable Second, Severely Errored Second, Burst Errored
		Second, Loss of Packet Seconds, Loss of Frame Count
	Standards
	Conformance
	ITU-T V.35	Data Transmission of 48 kbps Using 60-108 kHz Group Band Circuits
	ITU-T V.11 (10/96)	Electrical characteristics for balanced double-current interchange circuits operating at
		data signaling rates up to 10 Mbps
	ITU-T v.24	(10/96) - List of definitions for interchange circuits between data terminal equipment
		(DTE) and data circuit-terminating equipment (DCE)
	ITU-T V.28	Electrical characteristics for unbalanced double-current interchange circuits
	ITU-T G.704 (7/95)	Synchronous frame structures used at 1544, 6312, 2048, 8488 and 44 736 Kbps
		hierarchical levels
	ITU-T V.25bis	(Model 8213 only) (10/96) - Automatic answering equipment and general procedures for
		automatic calling equipment on the general switched telephone network including
		procedures for disabling of echo control devices for both manually and automatically
	EIA RS-422	Electrical characteristics of balanced voltage digital interface circuits
	EIA RS-449	General purpose 37 position and 9 position interface for DTE and DCE equipment
		employing serial binary data interchanges
March 2001				Page 47