46 ZOOM B9.1ut
MIDI Usage Examples
7*4(77YN!w)UR!<p7H[!
Program change number
Group name/bank number
Patch number
[TYPE] knob

To assign a patch to a program

5.

change number, proceed as

follows.

(1) Turn parameter knob 1 until the
program change numb er to use is
shown on the top line of the d isplay.
7*4(77YN!w)UR!<p7H[!
Program change number
Group name/bank number
Patch number
Parameter knob 1
(2) Use parameter knobs 2 and 3 to
select the group nam e/bank number
and patch number to ass ign to the
program change numb er selected in
step (1).
7*4(77YN!w)UR!< lp7H[!l
Parameter knob 2
Parameter knob 3
(3) Repeat these steps for other pr ogram
change numbers.

When the setting is co mplete,

6.

press the [EXIT] key to ca ncel the

SYSTEM menu.

If a setting was changed, the indication
"Store...?" appears on the display, to allow you
to store the changes.
If no setting was changed, the unit returns to t he
previous mode.

Press the [STORE/SWAP] key to

7.

save the changes.

The setting is accepted, and the unit retur ns to
manual mode or play mode.
By pressing the [EXIT] key, you can abort the
changes and return to play mode without saving.

To send and receive program

8.

change messages, pro ceed as

described in step 6 of "Usi ng

direct mode" (→ p. 44).

The program change (+ bank select) messages
sent by the unit are the same in direct mode and
mapping mode. For information on which bank
number/program change number is assigned to
each patch, see the list at the end of this manual
(→ p. 83).

Sending and receiving

pedal/switch/key operation

information via MIDI

(contr ol cha nge)

The B9.1ut allows sending and receiving control
change messages via MIDI. These messages
govern actions such as operating the expression
pedal, and switching modules or bypass/mute on
and off with keys and foot switches. Each action
can be assigned its own control change number
(cc#).

■ Enable control change send/receive

The procedure for enabling send/receive of
control change messages is described below.

In manual mode or play mode,

1.

press the [SYSTEM] key.

70*2<7:LS
(*;0=,