8ZOOM B9.1ut
Getting Connected
Refer to the examples shown below when making connections.
Use a shielded
mono cable to
connect the bass
guitar.
Bass guitar
Bass guitar
By connecting the USB port to a
computer, the B9.1ut can be used
as an audio interface.
Connect the optional
expression pedal (FP01/FP02).
Expression pedal
B9.1ut patch switching
and pedal operation
information can be
sent and received as
MIDI messages.
MIDI interface
Headphones
Computer
AC adapter

■ Connection example (1)

Use mono cables for connect ion
to bass amplifi ers. When using
only one bass amplifi er, use the
OUTPUT L/MONO jack.
Bass amplifi er
Use a mini phono plug stereo Y adap ter cable to connect
a rhythm machine (ZOOM SB-246 or sim ilar) or a CD/MD
player. The signal at the AUX IN jack is not pro cessed by
the internal effects but sup plied to the outputs as is. T his
signal is also sent to the USB por t.
Rhythm machine or similar

■ Connection example (2) (Usin g the B9.1ut as a DI)

Mixer
If the unit is connected to a mixer or to r ecording equipmen t
and input signal distortio n occurs, set this switch to "-10dB".
OUTPUT GAIN switch
This switch affects only the sig nal at the
BALANCED OUT R connector. In the "POS T"
position (switch engaged), the si gnal after effect
processing is output. In the "PR E" position (switch
disengaged), the signal af ter the accelerator bu t
before effect processi ng is output. The BALA NCED
OUT L/MONO connector alway s carries the post-
processing signal.
PRE/POST switch
This switch affects only the BAL ANCED OUT R and BALA NCED OUT
L/MONO connectors. In th e "LIFT" position (switch eng aged), the
ground pin is uncoupled fro m the signal path. In the "CONN ECT"
position (switch disengaged ), the ground pin is enabled .
GROUND switch
XLR connectors