27
ZOOM B9.1ut

Storing/swapping

patches

This section explains how to store and swap
patches.
In manual mode, play mode, o r edit

1.

mode, press the [STORE/SWAP ]
key.
The B9.1ut switches to the store standby
condition, and the currently selected patch
becomes the store/swap source.
The [BANK/PATCH] indicator shows the store/
swap target group name and bank number.
) +YP]Lw!7(;*/
:;69,&j<

Store/swap target
group name, bank number,
patch number
Store/swap target
bank name, bank
number
Store/swap source patch name
HINT
• In the factory defau lt condition, the use r
group (U) contains the same patches as th e
preset group (P).
• If a patch has been edited , it will be stored or
swapped in the edited conditio n.
• If a patch from the preset group is se lected
when you press the [STORE/SWAP] key,
the corresponding user group patch is
automatically selected as st ore target.
To store/swap individual patch es,

2.

turn parameter knob 2 to b ring up
the indication "PATCH" in the top
right of the display.
) +YP]Lw!7(;*/
:;69,&j<
Parameter knob 2
HINT
When "BANK" is shown, the sub sequent
operation will be carried out for the en tire bank.
Make sure that the correct indica tion is shown.
Turn parameter knob 1 to bring

3.

up the indication "STOR E?" or
"SWAP?" on the display.
) +YP]Lw!7(;*/
:;69,&j<
Parameter knob 1
When "STORE?" is selected, the current patch
can be stored as any user patch.
When "SWAP?" is selected, the current user
patch can be swapped with any other user patch.
NOTE
If the source patch is from the preset group, the
indication "SWAP?" does not appea r.
Select the store/swap ta rget bank/

4.

patch number.
• When activation sequence was manual
mode → store mode
• When activation sequence was manual
mode→ edit mode → store mode
This section explains how to use the store mode. In store mode, you can store edited patches in memor y,
or swap the store location of user group patches. Storing and swapping can also be carried out for
entire banks. The patches of the user group can be retur ned to the factory default condition at any time.
Storing Patches and Banks (Store Mode)