34 ZOOM B9.1ut
Using the Expression Peda l
7+3*HSPIYH[PVU
7,+(3=4(?Push the expression pe dal fully
3.
down in the vertical dir ection and
then lift your foot off t he pedal and
press the [STORE/SWAP] key.
Push strongly,
so that pedal
touches here
When foot is lifted,
pedal returns slightly
The display indication changes as follows.
7+3*HSPIYH[PVU
7,+(3/TPULift the stopper of th e expression
4.
pedal to secure the ped al. Then
turn the pedal fully to t he right and
press the [STORE/SWAP] key.
(1) Enable
stopper
(2) Turn pedal
fully to the right
The display indication changes as follows.
7+3*HSPIYH[PVU
7,+(3/4(?Push the stopper of the ex pression
5.
pedal down, turn the ped al fully to
the right, and press t he [STORE/
SWAP] key.
(2) Turn pedal
fully to the right
(1) Disable
stopper
The adjustment is completed, and the unit
returns to the play mode.
HINT
If the indication "ERROR" ap pears, return to
step 2 and repeat the procedure.
Using an external
expression pedal
If you connect an optional expression pedal
(FP01/FP02) to the CONTROL IN jack of the
B9.1ut, you can use it as a separate volume
pedal, freeing up the built-in expression pedal
for other functions.
Plug the cable of the ext ernal
1.
expression pedal int o the
CONTROL IN jack and turn power
to the B9.1ut on.
Operate the extern al expression
2.
pedal in manual mode, pl ay mode,
or edit mode.
The volume level changes.
HINT
The external expression pedal alwa ys operates
as volume pedal. It can also be used a s a
controller for sending MIDI message s (→ p. 46).