40 ZOOM B9.1ut
Connect the externa l effect to the
1.
EXT LOOP SEND/RETURN jac ks.
External effect
HINT
When connecting to an effect th at has a rated
input level of +4 dBm (rack-mount effect or
similar), set the EXT LOOP GAIN switc h to
the "+4 dBm" setting. When connecting to an
instrument effect or a compa ct effect, use the
"-10 dBm" setting.
NOTE
• The external effec t should always be set to
ON, to allow effect on/off switching at t he
B9.1ut.
• If the external effect a llows adjustment of
mixing ratio between original sou nd and
effect sound (such as a reverb or delay), set
the original sound to 0% and the ef fect sound
to 100%.
Select the patch in man ual mode
2.
or play mode.
HINT
Effect loop settings can be made i ndividually
for each patch.
Press the [EXT LOOP] ef fect
3.
module key to activate edit m ode.
Effect loop settings are made in the EXT LOOP
module.
The display changes as follows.
,?;3667
:LUK3L]LS$
NOTE
When "EXT LOOP Module Of f" is shown, the
EXT LOOP module is currently tur ned off.
Press the [EXT LOOP] key once more to turn
the module on.
Use parameter knob 1 to adj ust
4.
the level of the signal sent f rom
the B9.1ut to the external effe ct
(send level).
,?;3667
:LUK3L]LS$l
Parameter knob 1
HINT
If the input level at the external ef fect is not
suffi cient even with the send level turned up, or
if distortion occurs at the externa l effect input
even with the send level turned down , check
whether the EXT LOOP GAIN switc h setting is
appropriate.
Use parameter knob 2 to adj ust
5.
the level of the signal sent f rom
the external effec t to the B9.1ut
(return level).
The EXT LOOP SEND/RETURN jack s on the rear panel of the B9.1ut allow connection of a compact
effect, rack-mount effect or similar. Settings for external effect on/off and send/ret urn level can be
stored as part of a patch.
This section explains how to use the effect loop.