55
ZOOM B9.1ut
Other Functions
Loop playback
Effect
sound
Original
sound
Function foot switch 3

■ Note symbol is selected

After recording starts, it will cont inue for the
selected duration and then stop automatically.
However, if the combination of tempo and note
symbol setting results in a duration longer than
5.4 seconds, recording will stop when half of the
duration has elapsed. (If this is still longer than
5.4 seconds, recording will stop after one fourth
of the duration has elapsed.) After recording is
fi nished, loop playback starts.
Loop playback
Effect
sound
Original
sound
Function foot switch 3
Preset duration

HINT

• When there are recorded data , the LED of
function foot switch 2 will be lit in red .
• During loop playba ck, the LED of funct ion
foot switch 3 will fl ash in green.

To record another layer, press

7.

function foot switch 3 aga in during

loop playback.

The LED of function foot switch 3 lights up in
orange, the sound-on-sound recording starts.
You can listen to the loop playback and record a
new bass phrase.
When you press function foot switch 3 once
more, recording stops and the unit returns to
loop playback only.
Loop
playback
Loop
playback
Sound-
on-sound
recording
Effect
sound
Original
sound
Function
foot switch 3

To stop loop playback, press

8.

function foot switch 2 .

HINT

To start loop playback again, press fun ction
foot switch 3.

To clear the recorded conten ts,

9.

hold down function foot swi tch 2.

When the recorded content has been cleared
(LED of function foot switch 2 goes out), release
the switch.

NOTE

• The recorded content ca nnot be stored.
• When you change the eff ect type or switch
a module on or off, the recorded content i s
cleared.
• When the pedal syn th function (see next
section) is enabled, the sound- on-sound
function becomes unavai lable.
Using the pedal synth function
The B9.1ut offers a pedal synth function which
lets you use the foot switches on the front panel
to play a synthesizer bass sound. The steps for
this function are described below.

In manual mode or play mode,

1.

press the [PRE-AMP] key.

The B9.1ut switches to edit mode. If the