Zoom None quick start Ppp

9 What happens next depends on the type of encapsulation you selected above.

!Bridged or Routed: No additional configuration is usually required. Go to Step 10.

!PPP:

—You must change the highlighted entry in the Show pulldown list from Internal Modem to Ethernet Adaptor. If you see two Ethernet Adaptor entries, select the first one. The screen will change so that the Configure pulldown entry says Using PPP. If it says Using DHCP, select the second Ethernet Adaptor entry to force the change to take effect.

–-At the TCP/IP tab, click the PPPoE tab and then click checkbox labeled Connect Using PPPoE.

Important! This tab and checkbox covers both PPPoE and PPPoA, so click it if you are using either type of PPP. Then enter the Username (Account Name) and Password your service provider gave you, and click Apply Changes.

-Click the Internet Connect icon from the Dock, select Ethernet Adaptor from the Configuration pulldown list, and click Save Changes.

10 Verify that your Internet connection is working. Open your Web browser (i.e., Internet Explorer or Netscape Navigator) and try to connect to a familiar Web address.

If you connect successfully, your installation is complete and you are ready to browse the Web!

If you did not connect, see Connection Troubleshooting Tips on page 20.

17