ZTE Z797C user manual Getting Started, Installing a microSDXC Card, Charging the Battery

Table of Contents
Upgrading the Phone Software	75
Troubleshooting	76
For Your Safety	79
General Safety	79
Radio Frequency (RF) Energy	80
FCC Compliance	80
Hearing Aid Compatibility (HAC) Regulations
for Mobile Phones	81
Distraction	82
Product Handling	82
Electrical Safety	84
CTIA Requirements	84
Radio Frequency Interference	85
Explosive Environments	86
Specifications	87
Notes	88

4

Getting Started

Installing a microSDXC Card

You have the option to install a microSDXC card of up to 64 GB to expand your phone’s storage capacity. The microSDXC card can be installed and removed while the phone is turned on. Unmount the microSDXC card before removing it.

1. Remove the back cover.

2.Hold your microSDXC card with the metal contacts facing down and slide it into the microSDXC card slot.

NOTE: Some applications may not function normally after you remove the card, pre-installed or otherwise.

3.Align the back cover with the back of the phone and press the cover back into place. Make sure all the tabs are secure and there are no gaps around the cover.

Charging the Battery

Your phone’s battery should have enough power for the phone to turn on, find a signal, and make a few calls. You should fully charge the battery as soon as possible.

If the battery is low, there will be a pop-up message on the screen. As you charge your phone, the screen will tell you the exact battery level each time you wake up your phone.

5