ZyXEL Communications 128IMH manual Remote Node Bridging Setup, Step

Prestige 128IMH ISDN Modem/ Router/Hub

7.2.1 Remote Node Bridging Setup

Follow the procedure in Chapter 5 to configure the protocol-independent parameters in Menu

11.1- Remote Node Profile. For bridging-specific parameters, you need to configure Menu 11.3 - Remote Node Network Layer Options.

To setup Menu 11.3 - Remote Node Network Layer Options, follow these steps:

Step 1.	In Menu 11.1, make sure the Bridge field is set to Yes.
Step 2.	Move the cursor to the Edit IP/IPX/Bridge field, then press the space bar to select Yes
	and press [Enter] to open Menu 11.3 - Network Layer Options.
		Menu 11.3 - Remote Node Network Layer Options
		IP Options:	IPX Options:
		Rem IP Addr:	Dial-On-Query= No
		Rem Subnet Mask= N/A	Rem LAN Net #= 00000000
		My WAN Addr= N/A	My WAN Net #= 00000000
		Single User Account= N/A	Hop Count= 1
		Server IP Addr= N/A	Tick	Count= 2
		Metric= N/A	W/D	Spoofing(min)= 3
		Private= N/A	SAP/RIP Timeout(min)= 3
		RIP Direction= N/A
		Version= N/A	Bridge Options:
			Dial-On-Broadcast= No
			Ethernet Addr Timeout(min)= 0

Enter here to CONFIRM or ESC to CANCEL:

Figure 7-2 Menu 11.3 - Remote Node Bridging Options

Bridge Setup 7-3