Prestige 128IMH ISDN Modem/ Router/Hub
Figure 5-7Edit IP Static Route
The following table describes the fields for Menu 12.1.1 – Edit IP Static Route Setup.
| Table |
|
|
Field | Description |
|
|
Route Name | Enter a descriptive name for this route. This is for identification purpose only. |
|
|
Active | This field allows you to activate/deactivate this static route. |
|
|
Destination IP Address | This parameter specifies the IP network address of the final destination. |
| Routing is always based on network number. If you need to specify a route to a |
| single host, use a subnet mask of 255.255.255.255 in the subnet mask field to |
| force the network number to be identical to the host ID. |
|
|
IP Subnet Mask | Enter the subnet mask for this destination. Follow the discussion on IP subnet |
| mask in this chapter. |
|
|
Gateway IP Address | Enter the IP address of the gateway. The gateway is an immediate neighbor of |
| your Prestige that will forward the packet to the destination. On the LAN, the |
| gateway must be a router on the same segment as your Prestige; over WAN, |
| the gateway must be the IP address of one of the remote nodes. |
|
|
Metric | Same meaning as those in the Remote Node Setup. |
|
|
Private | Same meaning as those in the Remote Node Setup. |
|
|
Remote Node TCP/IP Configuration |
