ZyXEL Communications 128IMH Remote Node Network Layers Menu Bridge Options, Field Description

Prestige 128IMH ISDN Modem/ Router/Hub

The following table describes the bridging-specific parameters in the Remote Node Profile and Network Layers menus.

Table 7-2 Remote Node Network Layers Menu Bridge Options

Field	Description
Bridge	Make sure this field is set to Yes.
Edit IP/IPX/Bridge	Press the space bar to change it to Yes and press Enter] to go to the
	Network Layer Options Menu.
Dial-On-Broadcast	This field is necessary for your Prestige on the caller side LAN. When set
	to Yes, any broadcasts coming from the LAN will trigger your Prestige to
	make a call to this remote node. If it is set to No, your Prestige will not
	make the outgoing call.
Ethernet Addr Timeout (min)	In this field, enter the time (number of minutes) that you wish your Prestige
	to retain the Ethernet Addr information in its internal tables while the line is
	down. If this information is retained, your Prestige will not have to
	recompile the tables when the line is brought back up.

Once you have completed filling in the Network Layer Options Menu, press [Enter] to return to Menu 11.1. Then press [Enter] at the message [Press ENTER to Confirm…] to save your configuration, or press [Esc] to cancel.

7-4 Bridge Setup