Dhcp Configuration, IP Pool Setup | ZyXEL Communications 128IMH

Prestige 128IMH ISDN Modem/ Router/Hub

that it receives; when set to none, it will not send any RIP packets and will ignore any RIP packets received.

The Version field controls the format and the broadcasting method of the RIP packets that the Prestige sends (it recognizes both formats when receiving). RIP-1is universally supported; but RIP-2 carries more information. RIP -1 is probably adequate for most networks, unless you have a unusual network topology.

Both RIP-2Band RIP-2Msends the routing data in RIP-2 format; the difference being that RIP- 2B uses subnet broadcasting while RIP-2Muses multicasting. Multicasting can reduce the load on non-router machines since they generally do not listen to the RIP multicast address and so will not receive the RIP packets. However, if one router uses multicasting, then all routers on your network must use multicasting, also.

By default, RIP direction is set to Both and the Version set to RIP-1.

3.2.3 DHCP Configuration

DHCP (Dynamic Host Configuration Protocol) allows the individual clients (workstations) to obtain the TCP/IP configuration at start-up from a centralized DHCP server. The Prestige has built-in DHCP server capability, enabled by default, which means it can assign IP addresses, an IP default gateway and DNS servers to Windows 95, Windows NT and other systems that support the DHCP client.

IP Pool Setup

The Prestige is pre-configured with a pool of 32 IP addresses starting from 192.168.1.33 to 192.168.1.64. This configuration leaves 31 IP addresses (excluding the Prestige itself) in the lower range for other server machines, e.g., server for mail, FTP, telnet, web, etc., that you may have.

DNS Server Address

DNS (Domain Name System) is for mapping a domain name to its corresponding IP address and vice versa, e.g., the IP address of www.zyxel.com is 204.217.0.2. The DNS server is extremely important because without it, a user must know the IP address of a machine before s/he can access

Internet Access

3-3

Image 59

ZyXEL Communications 128IMH manual Dhcp Configuration, IP Pool Setup

Contents

ZyXEL Prestige 128IMH Federal Communications Commission FCC Interference Statement Information for Canadian Users ECC Interference Statement ZyXEL Limited Warranty Method North America Outside North Page Table of Contents Chapter IPX Configuration Chapter Internet AccessChapter Remote Node Configuration Chapter Remote Node TCP/IP Configuration 10-1 Chapter Dial-in Server Configuration 14-1 11-112-1 13-1 Isdn Information Worksheet Acronyms and Abbreviations Index Troubleshooting15-1 Page List of Figures Xvi List of Figures Xvii Xviii Xxvi List of Tables Edit Dial-in User Menu Fields List of Tables Xxi Page About Your Router/Hub Preface Completing the Setup Information Worksheet Isdn Phone Line Info Collecting Isdn Phone Line Information IP subnet masks and the number of hosts allowed Collecting Ethernet Setup Information Syntax Conventions Page Prestige 128IMH ISDN/Modem Bridge Router Features of Prestige 128IMHChapter Getting to Know Your Router/Hub Single User Account SUA Logging and Tracing Upgrade P128IMH Firmware via LAN Applications for Prestige 128IMH Internet AccessBuilt-In Modem Multi-Protocol/Multilink LAN-to-LAN Connection Internet Access Application LAN-to-LAN Connection Application Remote Access Server Telecommuting/Remote Access Server Application LED functions Chapter Hardware Installation & Initial SetupFront Panel Leds Prestige 128IMH Rear Panel and Connections Prestige 128IMH Rear Panel and Connections Connecting a Telephone/Fax to the Prestige Additional Installation Requirements Hardware Installation and Setup Power-On Display Power On Your Prestige Login Screen Operation Press/read Description Main Menu CommandsNavigating the SMT Interface Hardware Installation and Setup Menu Title Description System Management Terminal Interface SummaryMain Menu Summary Menu 23 System Security Changing the System Password Menu 23.1 System Security Change Password Menu 1 General Setup General Setup Yes/No General Setup Menu FieldsField Description Example Incoming Call Routing European Isdn Setup MenusSwitch Type MSN and Subaddress Outgoing Calling Party Number Modem CallsPabx Outside Line Prefix Isdn initstring set AT&ZOx=number Advanced Setup How to use call waiting General Ethernet Setup Ethernet Setup 13 Menu 3.1 General Ethernet Setup Protocol Dependent Ethernet Setup Route IP Setup Chapter Internet Access IP Address and Subnet Mask RIP SetupTCP/IP Parameters IP Pool Setup Dhcp Configuration Prestige 128IMH Isdn Modem/ Router/Hub Menu 3.2 TCP/IP and Dhcp Ethernet Setup TCP/IP Ethernet Setup and Dhcp None Dhcp Ethernet Setup Menu Fields 2B/RIP-2M TCP/IP Ethernet Setup Menu FieldsBoth Only/Out Only Internet Account Information Internet Access Configuration Field Description Internet Access Setup Menu Fields Option only applies when the Prestige initiates the call Prestige Single User Account Advantages of SUA Single User Account Menu Fields Single User Account Configuration To Switch ISP Configuring Backup ISP AccountsConfigure a Backup ISP Internet Access Page Remote Node Profile Chapter Remote Node ConfigurationRemote Node Setup Menu 11 Remote Node Setup Call Direction must be Both Field Description OptionsIncoming Outgoing PAP Enable Allocated Budget and Period do not apply 64k/ModemLeased Nailed-up Connection Outgoing Authentication Protocol BTR v MTR for BOD PPP MultilinkBandwidth on Demand Editing PPP Options Remote Node PPP Options Menu Fields Menu 11.5 Remote Node Filter Remote Node Filter LAN-to-LAN Application Chapter Remote Node TCP/IP Configuration Menu 11.3- Remote Node TCP/IP Options Remote Node Setup Yes TCP/IP related fields in Remote Node Profile No. See Internet Access Application for more TCP/IP Remote Node Configuration Example of Static Routing Topology Static Route Setup Menu 12 Static Route Setup Edit IP Static Route Menu Fields 7Edit IP Static RoutePage Network and Node Number Chapter IPX ConfigurationIPX Network Environment Internal Network Number Frame TypesExternal Network Number Netware Server NetWare Prestige in an IPX EnvironmentPrestige on LAN with Server NetWare Clients Prestige on LAN without Server IPX Spoofing Ethernet IPX Ethernet SetupNovell IPX Ethernet Setup Fields NetWare Server Internal Network Number = LAN-to-LAN Application with Novell IPXNetWare Clients External Network Number = Menu 11.3 Remote Node Novell IPX Options IPX Remote Node Setup Remote Node Novell IPX Options Menu 12.2 Edit IPX Static Route IPX Static Route Setup Edit IPX Static Route Menu Fields Page Bridging in General Chapter Bridging SetupBridge Ethernet Setup Handle IPX Field Description Menu Bridge Ethernet Setup Menu Handle IPX Field Configuration Step Remote Node Bridging Setup Remote Node Network Layers Menu Bridge Options Menu 12.3 Bridge Static Route Setup Bridge Static Route Setup Bridge Static Route Menu Fields Following table describes the Bridge Static Route Menu Remote Dial-in Users Remote Nodes Chapter Dial-in Server ConfigurationRemote Dial-in Users/Remote Nodes Comparison Chart Telecommuting Remote User Remote Access Server Example of a LAN-to-LAN Server Application LAN-to-LAN Server Application Menu 13 Default Dial-in Setup Default Dial-In Setup Preferred Default Dial-in Setup FieldsRequired Dial-In IP Address Supplied By Dial-in User is set to Dial-In IPX Net. Num. Supplied By IPX Pool field. Sets, see Filter Configuration. The default is Default Dial-in Filter Dial-In Users Setup Edit Dial-in User Mandatory Edit Dial-in User Menu FieldsOptional Callback Clid Authentication Multiple Servers behind SUA Configuring a Server behind SUA Services vs. Port number Multiple Server Configuration Dial-In Server Configuration Getting Started Chapter Advanced Phone Services Call Waiting Setting Up Supplemental Phone ServiceHow to use call waiting Flash Key Three way calling How To Use Three Way Calling To Do a Blind Transfer How To Use Call TransferCall Transfer Call Forwarding Phone Flash CommandsPage About Filtering Chapter Filter Configuration Filter Structure of the Prestige Menu 21 Filter Set Configuration Configuring a Filter Set Abbreviations Description Display Filter Rules Summary MenuAbbreviations Used in the Filter Rules Summary Menu Abbreviation Description Abbreviations Used If Filter Type Is IP Abbreviations Used If Filter Type Is GEN Abbreviations Used If Filter Type Is IPX 10.3.1 TCP/IP Filter Rule Configuring a Filter Rule Menu 21.1.1 TCP/IP Filter Rule Yes / N/A TCP/IP Filter Rule Menu FieldsNone/Less/Greater Equal/Not Equal Forward Action MatchedAction Not Matched Check Next Rule Menu 21.1.2 Generic Filter Rule Generic Filter Rule Generic Filter Rule Menu Fields Field Description Default Menu 21.1.3 IPX Filter Rule Novell IPX Filter Rule IPX Filter Rule Menu Fields Table below describes the IPX Filter Rule About Snmp Chapter Snmp ConfigurationConfiguring Snmp Snmp Configuration Menu Fields Following table describes the Snmp configuration parameters Chapter System Security System Security Installing a Radius Server Using Radius Authentication 12-4 Menu 23.2 System Security External Server Radius Server Configuration System Security External Server Menu Fields Key FieldAdding Users to the Radius Database Using Radius Authentication for Clid Page About Telnet Configuration Chapter Telnet Configuration and Capabilities Telnet Capabilities Single AdministratorSystem Timeout Telnet Under SUA Menu 24 System Maintenance Chapter System Maintenance System Status Menu 24.1 System Maintenance Status Field System Maintenance Status Menu Fields Refers to the IP address of the Prestige on Channel System Information System Maintenance Information Console Port Speed Fields in System Maintenance Log and Trace Viewing Error Log Examples of Error and Information Messages Parameter Description System Maintenance Menu Syslog ParametersSyslog And Accounting Call Information Messages Menu 24.4 System Maintenance Diagnostic Diagnostic Description System Maintenance Menu Diagnostic Trace Display for a Successful Manual Call Firmware Update Backup ConfigurationRestore Configuration Upload Router Firmware 11 Menu 24.7 System Maintenance Upload Firmware Uploading Router Configuration File Tftp Transfer Boot module commands 14 Boot module commands Call Control Command Interpreter Mode Call Control Parameters 16 Menu 24.9 System Maintenance Call Control Call Control Parameters Fields Blacklist 18 Menu 24.9.2 Blacklist Call History Budget Management This shows whether the call was incoming or outgoing This is the number of calls made to or received from that Problem Corrective Action Chapter TroubleshootingProblems Starting Up the Prestige Troubleshooting the Start-Up of your Prestige Troubleshooting the Isdn Line Problems With the Isdn Line Problems for Remote User to Dial-in Problems with the LAN InterfaceProblems Connecting to a Remote Node or ISP 15-4 Isdn Information Worksheet Isdn Setup Information Ethernet Setup Information Acronyms and Abbreviations Pstn Contact person Index Gateway, 5-7,6-10,7-16 Rivate, 5-4,5-7