ZyXEL Communications 128IMH manual Enable, Pap

Prestige 128IMH ISDN Modem/ Router/Hub

Incoming:	Rem Node	Enter the password used when this remote node calls
	Password	your Prestige.
Incoming:	Rem CLID	This field is applicable only if Call Direction is either Both
		or Incoming. Otherwise, an N/A appears in the field.
		This is the Calling Line ID (the telephone number of the
		calling party) of this remote node.
		If you enable the CLID Authen field in Menu 13 – Default
		Dial In, your Prestige will check the CLID in the incoming
		call against the CLIDs in the database. If no match is
		found and CLID Authen is Required, the call will be
		dropped.
Incoming:	Callback	This field is applicable only if Call Direction is Both.		Enable
		Otherwise, an N/A appears in the field.		Disable
		This field determines whether or not your Prestige will call
		back after receiving a call from this remote node.
		If this option is enabled, your Prestige will disconnect the
		initial call from this node and call it back at the Outgoing
		Primary Phone Number (see below).
Outgoing:	My Login	This is a required field [?] if Call Direction is either Both
	Name	or Outgoing. Enter the login name for your Prestige when
		it calls this remote node.
Outgoing:	My	This is a required field [?] if Call Direction is either Both
	Password	or Outgoing. Enter the password for your Prestige when
		it calls this remote node.
Outgoing:	Authen	This field sets the authentication protocol used for
		outgoing calls.
		Options for this field are:
		• CHAP/PAP - Your Prestige will accept either CHAP		CHAP/PAP
			or PAP when requested by this remote node.
		•	CHAP - accept CHAP only.	CHAP
		•	PAP - accept PAP only.	PAP
Outgoing:	Pri(mary)	Your Prestige always calls this remote node using the
	Sec(ondary	Primary Phone number first for a dial-up line.
	) Phone

4-4 Remote Node Configuration