Prestige 2602H/HW Series User’s Guide
•A wireless station computer must be running IEEE
•An optional network RADIUS server for remote user authentication and accounting.
Select Authentication Required in the Wireless Port Control field and 802.1x in the Key Management Protocol field to display the next screen.
Figure 35 Wireless LAN: 802.1x/WPA: 802.1xl
The following table describes the labels in this screen.
Table 22 Wireless LAN: 802.1x/WPA: 802.1x
LABEL | DESCRIPTION |
|
|
Wireless Port | To control wireless station access to the wired network, select a control method |
Control | from the |
| Authentication Required and No Access Allowed. |
| The following fields are only available when you select Authentication Required. |
|
|
ReAuthentication | Specify how often wireless stations have to reenter usernames and passwords in |
Timer | order to stay connected. This field is activated only when you select |
(in Seconds) | Authentication Required in the Wireless Port Control field. |
| Enter a time interval between 10 and 9999 seconds. The default time interval is |
| 1800 seconds (30 minutes). |
| Note: If wireless station authentication is done using a RADIUS | |
| server, the reauthentication timer on the RADIUS server has | |
| priority. | |
|
| |
Idle Timeout | The Prestige automatically disconnects a wireless station from the wired network | |
(in Seconds) | after a period of inactivity. The wireless station needs to enter the username and | |
password again before access to the wired network is allowed. | ||
| ||
| This field is activated only when you select Authentication Required in the | |
| Wireless Port Control field. The default time interval is 3600 seconds (or 1 hour). |
Chapter 5 Wireless LAN (P2602HW Models) | 101 |