Prestige 2602H/HW Series User’s Guide

 

Table 122 Menu 15.1.1.1 Editing/Configuring an Individual Rule in a Set (continued)

 

 

 

 

FIELD

DESCRIPTION

 

 

 

 

End

This is the ending local IP address (ILA). If the rule is for all local IPs, then put the Start

 

 

IP as 0.0.0.0 and the End IP as 255.255.255.255. This field is N/A for One-to-One and

 

 

Server types.

 

Global IP

 

 

 

 

 

Start

This is the starting inside global IP address (IGA). If you have a dynamic IP, enter

 

 

0.0.0.0 as the Global IP Start. Note that Global IP Start can be set to 0.0.0.0 only if

 

 

the types are Many-to-One or Server.

 

End

This is the ending inside global IP address (IGA). This field is N/A for One-to-One,

 

 

Many-to-One and Server types.

 

Server

Only available when Type is set to Server. Type a number from 1 to 10 to choose a

 

Mapping Set

server set from menu 15.2.

 

When you have completed this menu, press [ENTER] at the prompt “Press ENTER to Confirm

 

or ESC to Cancel:” to save your configuration, or press [ESC] at any time to cancel.

32.4 Configuring a Server Behind NAT

Follow these steps to configure a server behind NAT:

1Enter 15 in the main menu to go to Menu 15 - NAT Setup.

2Enter 2 to display Menu 15.2 - NAT Server Sets as shown next.

Figure 184 Menu 15.2 NAT Server Setup

Menu 15.2 - NAT Server Sets

1.

Server

Set 1 (Used for SUA Only)

2.

Server

Set 2

3.

Server

Set 3

4.

Server

Set 4

5.

Server

Set 5

6.

Server

Set 6

7.

Server

Set 7

8.

Server

Set 8

9.

Server

Set 9

10.

Server

Set 10

Enter Set

Number to Edit:

3Enter 1 to go to Menu 15.2 NAT Server Setup as follows.

Chapter 32 Network Address Translation (NAT)

343