Prestige 2602H/HW Series User’s Guide
CHAPTER 23
Introducing the SMT
This chapter explains how to access and navigate the System Management Terminal and gives an overview of its menus.
23.1 Introduction to the SMT
The Prestige’s SMT (System Management Terminal) is a
23.1.1 Procedure for SMT Configuration via Telnet
The following procedure details how to telnet into your Prestige.
1In Windows, click Start (usually in the bottom left corner), Run and then type "telnet 192.168.1.1" (the default IP address) and click OK.
2Enter “1234” in the Password field.
3After entering the password you will see the main menu.
Please note that if there is no activity for longer than five minutes (default timeout period) after you log in, your Prestige will automatically log you out. You will then have to telnet into the Prestige again.
23.1.2 Entering Password
The login screen appears after you press [ENTER], prompting you to enter the password, as shown next.
For your first login, enter the default password "1234". As you type the password, the screen displays an asterisk "*" for each character you type.
Please note that if there is no activity for longer than five minutes after you log in, your Prestige will automatically log you out.
Chapter 23 Introducing the SMT | 291 |