Prestige 2602H/HW Series User’s Guide
34.2 Configuring a Filter Set for the Prestige
To configure a filter set, follow the steps shown next.
1Enter 21 in the main menu to display Menu 21 – Filter and Firewall Setup.
2Enter 1 to display Menu 21.1 – Filter Set Configuration as shown next.Figure 202 Menu 21 Filter Set Configuration
Filter | Menu 21.1 - Filter Set Configuration | ||
Comments | Filter | Comments | |
Set # | Set # | ||
1 | _______________ | 7 | _______________ |
2 | NetBIOS_WAN | 8 | _______________ |
3 | NetBIOS_LAN | 9 | _______________ |
4 | IGMP | 10 | _______________ |
5 | _______________ | 11 | _______________ |
6 | _______________ | 12 | _______________ |
Enter Filter Set Number to Configure= 0
Edit Comments= N/A
Press ENTER to Confirm or ESC to Cancel:
3Type the filter set to configure (no. 1 to 12) and press [ENTER].
4Type a descriptive name or comment in the Edit Comments field and press [ENTER].
5Press [ENTER] at the message “Press ENTER to confirm…” to display Menu 21.1.1 – Filter Rules Summary (that is, if you selected filter set 1 in menu 21.1).
Figure 203 NetBIOS_WAN Filter Rules Summary
# A Type | Menu 21.1.2 - Filter Rules Summary | M m n |
Filter Rules |
- -
- - | Pr=6, SA=0.0.0.0, DA=0.0.0.0, DP=137 | N D N | |
1 | Y IP | ||
2 | Y IP | Pr=6, SA=0.0.0.0, DA=0.0.0.0, DP=138 | N D N |
3 | Y IP | Pr=6, SA=0.0.0.0, DA=0.0.0.0, DP=139 | N D N |
4 | Y IP | Pr=17, SA=0.0.0.0, DA=0.0.0.0, DP=137 | N D N |
5 | Y IP | Pr=17, SA=0.0.0.0, DA=0.0.0.0, DP=138 | N D N |
6 | Y IP | Pr=17, SA=0.0.0.0, DA=0.0.0.0, DP=139 | N D F |
Enter Filter Rule Number
Chapter 34 Filter Configuration | 357 |