Prestige 2602H/HW Series User’s Guide

Figure 246 Menu 24.10 System Maintenance: Time and Date Setting

Menu 24.10 - System Maintenance - Time and Date Setting

Use Time Server when Bootup= None

 

 

Time Server Address= N/A

00 : 51 :

24

Current Time:

New Time (hh:mm:ss):

00 : 51 :

19

Current Date:

2000 - 01

- 01

New Date (yyyy-mm-dd):

2000 - 01

- 01

Time Zone= GMT

 

 

Daylight Saving= No

01

- 00

Start Date (mm-dd):

End Date (mm-dd):

01

- 00

Press ENTER to Confirm or ESC to Cancel:

Table 142 Menu 24.10 System Maintenance: Time and Date Setting

FIELD

DESCRIPTION

 

 

Use Time Server

Enter the time service protocol that your time server uses. Not all time servers

when Bootup

support all protocols, so you may have to check with your ISP/network

 

administrator or use trial and error to find a protocol that works. The main

 

differences between them are the format.

 

Daytime (RFC 867) format is day/month/year/time zone of the server.

 

Time (RFC-868)format displays a 4-byte integer giving the total number of

 

seconds since 1970/1/1 at 0:0:0.

 

NTP (RFC-1305) is similar to Time (RFC-868).

 

None. The default, enter the time manually.

 

 

Time Server Address

Enter the IP address or domain name of your time server. Check with your ISP/

 

network administrator if you are unsure of this information.

Current Time

This field displays an updated time only when you reenter this menu.

New Time

Enter the new time in hour, minute and second format.

 

 

Current Date

This field displays an updated date only when you re-enter this menu.

New Date

Enter the new date in year, month and day format.

 

 

Time Zone

Press [SPACE BAR] and then [ENTER] to set the time difference between your

 

time zone and Greenwich Mean Time (GMT).

Daylight Saving

If you use daylight savings time, then choose Yes.

 

 

Start Date

If using daylight savings time, enter the month and day that it starts on.

 

 

End Date

If using daylight savings time, enter the month and day that it ends on

 

 

When you have completed this menu, press [ENTER] at the prompt “Press ENTER to Confirm or ESC to Cancel:” to save your configuration, or press [ESC] at any time to cancel.

39.3.1Resetting the Time

•The Prestige resets the time in three instances:

•On leaving menu 24.10 after making changes.

•When the Prestige starts up, if there is a timeserver configured in menu 24.10.

404

Chapter 39 System Maintenance