Prestige 2602H/HW Series User’s Guide

Figure 48 NAT Mode

The following table describes the labels in this screen.

Table 32 NAT Mode

LABEL

DESCRIPTION

 

 

None

Select this radio button to disable NAT.

 

 

SUA Only

Select this radio button if you have just one public WAN IP address for your Prestige.

 

The Prestige uses Address Mapping Set 1 in the NAT - Edit SUA/NAT Server Set

 

screen.

Edit Details

Click this link to go to the NAT - Edit SUA/NAT Server Set screen.

 

 

Full Feature

Select this radio button if you have multiple public WAN IP addresses for your Prestige.

 

 

Edit Details

Click this link to go to the NAT - Address Mapping Rules screen.

 

 

Apply

Click Apply to save your configuration.

 

 

7.5 Configuring SUA Server

If you do not assign an IP address in Server Set 1 (default server) the Prestige discards all packets received for ports that are not specified here or in the remote management setup.

Click NAT, select SUA Only and click Edit Details to open the following screen.

Refer to Table 31 on page 125 for port numbers commonly used for particular services.

Chapter 7 Network Address Translation (NAT) Screens

127