ZyXEL Communications 56K Plus Series 4.4Voice Shielded DTE Commands, 4.5Voice Shielded DTE Responses, Table 4-12Voice AT Commands, Table 4-13Voice Shielded DTE Commands

Omni 56K Plus Series User’s Guide

Table 4-12 Voice AT Commands

COMMAND	FUNCTION	OPTION	DEFAULT	DESCRIPTION
+VTS=	DTMF Tone	x:0-9,*,#, A-D	NA	x: DTMF digits (0-9,*,#, A,B,C,D)
x,x…	Generation			Duration:+VTD setting. (in 10ms unit)
+VTD	Set default	1-255	100	Unit: 0.01 second.
	duration of
	DTMF tone.
+VIT	Inactivity	0-255	70	Unit: 0.1 second.
	timer.

4.4Voice Shielded DTE Commands

	Table 4-13 Voice Shielded DTE Commands
COMMAND	DESCRIPTION
<DLE>p	Pause, suspend voice data to the output device in playback state.
<DLE>r	Resume, resume suspended voice data in playback state.
<DLE><ETX>	Terminate voice playback state, switch to online voice command mode after completing
	remaining data in buffer.

4.5Voice Shielded DTE Responses

	Table 4-14 Voice Shielded DTE Responses
RESPONSE CODE	DESCRIPTION
<DLE>0 - <DLE>9	DTMF digit detected
<DLE>*, <DLE>#
<DLE>A-<DLE>D
<DLE>a	Answer Tone detected
<DLE>b	Busy detected
<DLE>c	Calling Tone detected
<DLE>d	Dial tone detected
<DLE>e	European Data Modem Calling Tone detected
<DLE>f	Bell Answer Tone detected
<DLE>h	The local handset on hook
<DLE>q	Quiet detected
<DLE>s	Silence detected
<DLE>H	The local handset on hook
<DLE>u	Transmission Under run in playback state
<DLE><ETX>	End of stream

4-18 Command Sets