ZyXEL Communications 56K Plus Series manual 50

Omni 56K Plus Series User’s Guide

Table 4-16 Extended S-Registers "ATSn=x"

COMMAND	BIT	DEC	HEX	FUNCTION AND DESCRIPTION	REF.
		2	2	Speaker is ON until carrier is detected. (Default)	M1*
		4	4	Speaker is always ON.	M2
		6	6	Speaker is ON after last digit is dialed out until carrier	M3
				detected.
	3	0	0	DSR is always ON. (Default)	&S0*
		8	8	According to CCITT. (see also S44.4, S41.5)	&S1
	4	0	0	CD is always ON.	&C0
		16	10	CD tracks presence of data carrier. (see also S38.3)	&C1*
				(Default)
	6-7	0	0	Assume DTR always On.	&D0
		64	40	108.1, DTR OFF-ON transition causes dial of the	&D1
				default number.
		128	80	108.2 Data Terminal Ready, DTR OFF causes the	&D2*
				modem to hang up and return to command state.
				(Default)
		192	C0	108.2+RST, DTR OFF causes the modem to hang up	&D3
				and reset the modem to profile 0 after DTR dropped.
S23=	bit	dec	hex	Bit mapped register.	+105
	0	0	0	Command echo disabled.	E0
		1	1	Command echo enabled. (Default)	E1*
	1	0	0	Tone dial. (Default)	T*
		2	2	Pulse dial.	P
	2	0	0	Pulse dial make/break ratio = 39% / 61% (Default)	&P0*
		4	4	Pulse dial make/break ratio = 33% / 67%	&P1
	3-5	0	0	ATX0 (See result code table)	X0
		8	8	ATX1	X1
		16	10	ATX2	X2
		24	18	ATX3	X3
		32	20	ATX4	X4
		40	28	ATX5, error control result code is enabled. (Default)	X5*
		48	30	ATX6, error control result code is enabled.	X6
		56	38	ATX7, error control result code is enabled.	X7
	6	0	0	Display result code in numeric format. (see S35.7)	V0
		64	40	Display result code in verbose format. (Default)	V1*
	7	0	0	Modem returns result code. (Default)	Q0*
		128	80	Modem does not return result code. (see also S40.1)	Q1
S24=	bit	dec	hex	Bit mapped register.

4-22 Command Sets