ZyXEL Communications GS1900 (mW), (mA), Port, PD State, Consuming, Max Power, Port List, Power (mW), PD Priority, Max Current, priority first, cannot receive power from the Switch

Chapter 18 Configuration: Port

Table 63 Configuration > Port > PoE > PoE (continued)

LABEL	DESCRIPTION
PD Priority	When the total power requested by the PDs exceeds the total PoE power budget on the
	Switch, you can set the PD priority to allow the Switch to provide power to ports with higher
	priority first.
	• Critical has the highest priority.
	• High has the Switch assign power to the port after all critical priority ports are served.
	• Low has the Switch assign power to the port after all critical and high priority ports are served
Consuming	Displays the current amount of power consumed by the PD from the Switch on this port.
Power (mW)
Max Power	Displays the maximum amount of power the PD could use from the Switch on this port
(mW)
Max Current	Displays the maximum amount of current drawn by the PD from the Switch on this port.
(mA)

18.4.1 The PoE Edit Screen

Use this screen to configure Switch port PoE settings. Click Configuration > Port > PoE > PoE > Edit to open this screen.

Figure 81 Configuration > Port > PoE > PoE > Edit

The following table describes the labels in this screen.

Table 64 Configuration > Port > PoE > PoE> Edit

LABEL	DESCRIPTION
Port
Port List	Displays the list of port index numbers that are being configured.
PD State	Select Enable to provide power to a PD connected to the port or Disable so the port
	cannot receive power from the Switch.

100
	GS1900 Series User’s Guide