ZyXEL Communications GS1900 Port, Apply, (Kbps), Egress, (Kbps), Cancel, Ingress, Port Rate, Port List, Bandwidth, Bandwidth, Egress Rate, Ingress Rate, Limit (Kbps), Limit (Kbps)

	Chapter 18 Configuration: Port
Table 65 Configuration > Port > Bandwidth Management > Bandwidth Control (continued)
LABEL	DESCRIPTION
Port	Displays the port index number.
Ingress Rate	Displays the maximum bandwidth allowed in kilobits per second (Kbps) for the incoming
Limit (Kbps)	traffic flow on a port.
Egress Rate	Displays the maximum bandwidth allowed in kilobits per second (Kbps) for the outgoing
Limit (Kbps)	traffic flow on a port.

18.5.2 The Port Rate Edit Screen

Use this screen to configure port rate Bandwidth Management settings. Click Configuration > Port > Bandwidth Management > Bandwidth Control > Edit to open this screen.

Figure 83 Configuration > Port > Bandwidth Management > Bandwidth Control > Edit

The following table describes the labels in this screen.

Table 66 Configuration > Port > Bandwidth Management > Bandwidth Control > Edit

LABEL	DESCRIPTION
Port Rate
Port List	Displays the list of port index numbers that are being configured.
Ingress State	Select Enable to activate ingress peak rate limits on the port(s).
Ingress	Enter the maximum bandwidth allowed in kilobits per second (Kbps) for the outgoing traffic
Bandwidth	flow on a port.
(Kbps)
Egress State	Select Enable to activate egress peak rate limits on the port(s).
Egress	Enter the maximum bandwidth allowed in kilobits per second (Kbps) for the outgoing traffic
Bandwidth	flow on a port.
(Kbps)
Apply	Click Apply to save the changes.
Cancel	Click Cancel to discard the changes.

	103
GS1900 Series User’s Guide