ZyXEL Communications GS1900 No, Port, Apply, Apply, Action, Source, Cancel, Cancel, Service, IPv4/Wildcard, Management Access List Add, Click Apply to save the changes

Chapter 30 Configuration: Management

Figure 191 Configuration > Management > Remote Access Control > Profile > Add/Modify

The following table describes the labels in this screen.

Table 173 Configuration > Management > Remote Access Control > Profile > Add/Modify

LABEL	DESCRIPTION
Management Access List Add
No.	Enter the priority level of the entry. The value can be between 1 and 16.
Action	Select the action value. The values are Permit or Deny.
Port	Select a value in Available and click the Add (>) icon to transfer to the Acting column.
	Select a value in Acting and click the Remove (<) icon to transfer to the Available column.
Source	Select the source IP value. The options are ALL or IPv4/Wildcard.
IPv4/Wildcard	Select and enter the IPv4/Wildcard source.
Service	Select the service to use for remote access. The values are ALL, HTTP, HTTPS, or SNMP.
Apply	Click Apply to save the changes.
Cancel	Click Cancel to discard the changes.

	207
GS1900 Series User’s Guide