ZyXEL Communications GS1900 Trap, SNMP, Trap, Apply, Cancel, SNMP User, User Name, Group Name, Management, Auth Protocol, Auth Password, Priv password, Configuration, protocols are:

Chapter 30 Configuration: Management

Figure 181 Configuration > Management > SNMP > User > Add/Modify

The following table describes the labels in this screen.

Table 163 Configuration > Management > SNMP > User > Add/Modify

LABEL	DESCRIPTION
SNMP User
User Name	Enter a string identifying the user name that this entry belongs to. The allowed string
	length is 1 to 30, and the allowed content is ASCII characters from 33 to 126.
Group Name	Enter a string identifying the group name that this entry belongs to. The allowed string
	length is 1 to 30, and the allowed content is ASCII characters from 33 to 126.
Auth Protocol	Select the authentication protocol that this entry belongs to. Possible authentication
	protocols are:
	• MD5: An optional flag to indicate that this user uses MD5 authentication protocol.
	• SHA: An optional flag to indicate that this user uses SHA authentication protocol.
	The value of the security level cannot be modified if the entry already exists. That means
	you must first ensure that the value is set correctly.
Auth Password	Enter a string identifying the authentication password phrase. For MD5 authentication
	protocol, the allowed string length is 8 to 32. For SHA authentication protocol, the allowed
	string length is 8 to 32. The allowed content is ASCII characters from 33 to 126.
Priv password	Enter a string identifying the privacy password phrase. The allowed string length is 8 to 64
	and the allowed content is ASCII characters from 33 to 126.
Apply	Click Apply to save the changes.
Cancel	Click Cancel to discard the changes.

30.3.8 The Trap Screen

Use this screen to configure the Trap settings. Click Configuration > Management > SNMP > Trap to open this screen.

198
	GS1900 Series User’s Guide