ZyXEL Communications GS1900 mode, Edit, Port, State, Class, screen, PoE Mode, PoE Setting, Displays the port index number, Classification or Consumption mode

Chapter 18 Configuration: Port

Figure 80 Configuration > Port > PoE > PoE

The following table describes the labels in this screen.

Table 63 Configuration > Port > PoE > PoE

LABEL	DESCRIPTION
PoE Setting
PoE Mode	This field displays the power management mode used by the Switch, whether it is in
	Classification or Consumption mode.
Edit	Select this check box to enable a port. The factory default for all ports is enabled. A port
	must be enabled for data transmission to occur.
Port	Displays the port index number.
State	Displays which ports can receive power from the Switch. You can set this in the
	Configuration > Port > PoE Edit screen.
	• Disable - The PD connected to this port cannot get power.
	• Enable - The PD connected to this port can receive power.
Class	This shows the power classification of the PD.
	This is a number from 0 to 4, where each value represents a range of power (W) and
	current (mA) that the PD requires to function. The ranges are as follows.
	• Class 0 - Default, 0.44 to 12.94
	• Class 1 - Optional, 0.44 to 3.84
	• Class 2 - Optional, 3.84 to 6.49
	• Class 3 - Optional, 6.49 to 12.95
	• Class 4 - Reserved (PSEs classify as Class 0) in a switch that supports IEEE 802.3af only. Optional, 12.95 to
	25.50 in a switch that supports IEEE 802.3at.

	99
GS1900 Series User’s Guide