ZyXEL Communications GS1900 Add, Edit, Edit, Count, State, Apply, Apply, Ports, Cancel, Cancel, Modify, Delete, Delete, Querier, Version, VLAN ID, Forbidden, Add/Modify, Router Port

Chapter 24 Configuration: Multicast

Table 100 Configuration > Multicast > IGMP > VLAN > Modify (continued)

LABEL	DESCRIPTION
Last Member Query
Count	Enter the number of queries.
Interval (sec)	Enter the amount of time (in seconds) between the IGMP group-specific queries sent by an
	upstream port when an IGMP Done message is received.
Querier
IGMP Querier	Select the IGMP querier status to Enable or Disable the function.
State
IGMP Querier	Select the IGMP Querier version to v2 or v3.
Version
Apply	Click Apply to save the changes.
Cancel	Click Cancel to discard the changes.

24.2.4 The Router Port Screen

Use this screen to view the Router Port settings. Click Configuration > Multicast > IGMP > Router Port to open this screen.

Figure 119 Configuration > Multicast > IGMP > Router Port

The following table describes the labels in this screen.

Table 101 Configuration > Multicast > IGMP > Router Port

LABEL	DESCRIPTION
Router Port
Add	Click Add to create a new Router Port entry.
VLAN ID	Displays the ID of a static VLAN; the valid range is between 1 and 4094.
Static Router	Displays the ports that are defined as static router ports.
Ports
Forbidden	Displays the ports that are defined as forbidden router ports.
Router Ports
Modify
Edit	Click Edit to make changes to the entry.
Delete	Click Delete to remove the entry.

24.2.5 The Add/Edit Router Port Screen

Use this screen to configure the Router Port settings. Click Configuration > Multicast > IGMP > Router Port > Add/Modify to open this screen.

138
	GS1900 Series User’s Guide