ZyXEL Communications GS1900 Log, and, Port, Edit, Port, Apply, Apply, State, Cancel, Cancel, Action, Recovery Time, Shutdown Port, Shutdown and Log, Displays the port index number

	Chapter 22 Configuration: Loop Guard
Table 94 Configuration > Loop Guard (continued)
LABEL	DESCRIPTION
Recovery Time	Enter the period (in seconds) for which a port will be kept disabled in the event of a loop is
	detected (and the port action shuts down the port).
Apply	Click Apply to save the changes.
Cancel	Click Cancel to discard the changes.

22.2.2 The Loop Guard Port

Use this screen to view the Loop Guard Port. Click Configuration > Loop Guard > Port to open this screen.

Figure 113 Configuration > Loop Guard > Port

The following table describes the labels in this screen.

Table 95 Configuration > Loop Guard > Port

LABEL	DESCRIPTION
Port
Edit	Click Edit to change the properties of the port.
Port	Displays the port index number.
State	Displays whether the port state is Enable or Disable.
Action	Displays the action to take by the Switch. The options are Log, Shutdown Port, and
	Shutdown and Log.

22.2.3 The Port Edit Screen

Use this screen to configure a Loop Guard port. Click Configuration > Loop Guard > Port > Edit to open this screen.

	131
GS1900 Series User’s Guide