ZyXEL Communications GS1900 LAG, LAG, Name, Type, Edit, Name, Apply, Apply, State, Speed, Cancel, Cancel, Duplex, LAG Port, Port Type, Member Ports, FlowCtrl State, FlowCtrl Status

Chapter 21 Configuration: Link Aggregation

The following table describes the labels in this screen.

Table 89 Configuration > Link Aggregation > LAG Management > Add

LABEL	DESCRIPTION
LAG Management
LAG	Select the link aggregation group (LAG).
Name	Enter the name of this entry.
Type	Select Static or LACP.
Member Ports	Select the member ports to be part of the LAG.
Apply	Click Apply to save the changes.
Cancel	Click Cancel to discard the changes.

21.2.4 The LAG Port Screen

Use this screen to view LAG port settings. Click Configuration > Link Aggregation > LAG Port to open this screen.

Figure 108 Configuration > Link Aggregation > LAG Port

The following table describes the labels in this screen.

Table 90 Configuration > Link Aggregation > LAG Port

LABEL	DESCRIPTION
LAG Port
Edit	Select this check box to configure the properties of a port. Click the Edit button change the
	properties of the port.
LAG	Displays the LAG index value.
Name	Displays the LAG name.
Port Type	Displays the port type.
State	Displays the state as Enable/Disable.
Speed	Displays the speed value as Auto, Auto-10M,Auto-100M,Auto-1000M,Auto-10/
	100M, 10M, 100M, or 1000M.
Duplex	Displays the duplex value as Full, Half, or Auto.
FlowCtrl State	Displays whether flow control is Enable/Disable.
FlowCtrl Status	Displays whether flow control is in use (Enable) or not (Disable).

126
	GS1900 Series User’s Guide