ZyXEL Communications NSA320 2.4 Main NAS Starter Utility Screen

Chapter 2 NAS Starter Utility

The main NAS Starter Utility screen displays after you select a NSA in the NSA Discovery screen.

Figure 5 NAS Starter Utility Main Screen

The following table describes the labels in this screen.

Table 3 NAS Starter Utility Main Screen

LABEL	DESCRIPTION
Discovery	Click this to use the NSA Discovery screen (Section 2.3 on page 29) to
	find and select the NSA on your network to which you want to connect.

bar	The bar shows the NSA’s in-use and remaining storage capacity.

Name	This is the server name you configured for the NSA. If you have more
	than one NSA in your network, it is recommended that you give each
	one a unique name for identification purposes.

Firmware	This shows the version of firmware the NSA is currently using.

IP address	This is the current IP address of the NSA.

Status	This shows whether the NSA is Online, Unreachable, Configuring,
	or Config Failed.

NAS Discovery	Click this to use the NSA Discovery screen (Section 2.3 on page 29) to
	find and select the NSA on your network to which you want to connect.

Import files or	Click this to launch zPilot to drag and drop files onto the NSA.
folders with
zPilot

Add a network	Click this to add the NSA as a network drive in your computer’s
drive to My	Windows Explorer.
Computer

Manage the	Click this to log into the advanced administration screens. See Section
device	3.5 on page 66 for details on the administration screens.