ZyXEL Communications NSA320 46

Chapter 2 NAS Starter Utility

Click Configure network setting in the main utility screen to display the following screen.

Figure 34 NAS Starter Utility > Configure network setting

The following table describes the labels in this screen.

Table 5 NAS Starter Utility > Config

LABEL	DESCRIPTION
NAS Name	Specify a name to uniquely identify the NSA on your network. You can
	enter up to 15 alphanumeric characters with minus signs allowed but
	not as the last character. The name must begin with an alphabetic
	character (a-z) and is case sensitive.

Get IP	Select this if the NSA is automatically assigned an IP address from the
automatically	ISP or a DHCP server in your network.
from DHCP
server

Assign IP	Select this if you want to assign the NSA a fixed IP address, subnet
Manually	mask and default gateway.

	Note: Do not configure an IP address that is already in use in your
	network. This results to a network IP address conflict and
	makes the NSA inaccessible.

Use DNS server	Domain Name System (DNS) is for mapping a domain name to its
from DHCP	corresponding IP address and vice versa. Select this if the NSA is
server	automatically given DNS information from the ISP or a DHCP server in
	your network.

Assign DNS	If you were given specific IP address(es) of the DNS server(s), select
server manually	this and enter the primary and secondary DNS in the corresponding
	fields.

PPPoE	Click this if your Internet connection requires you to enter a user name
	and password to connect to the Internet.