Chapter 2 NAS Starter Utility
The following table describes the labels in this screen.
Table 4 NAS Starter Utility > Config
LABEL | DESCRIPTION |
Get IP | Select this if the NSA is automatically assigned an IP address from the |
automatically | ISP or a DHCP server in your network. |
from DHCP |
|
server |
|
|
|
Assign IP | Select this if you want to assign the NSA a fixed IP address, subnet |
Manually | mask and default gateway. |
| Note: Do not configure an IP address that is already in use in your |
| network. This results to a network IP address conflict and |
| makes the NSA inaccessible. |
|
|
Use DNS server | Domain Name System (DNS) is for mapping a domain name to its |
from DHCP | corresponding IP address and vice versa. Select this if the NSA is |
server | automatically given DNS information from the ISP or a DHCP server in |
| your network. |
|
|
Assign DNS | If you were given specific IP address(es) of the DNS server(s), select |
server manually | this and enter the primary and secondary DNS in the corresponding |
| fields. |
2If your Internet connection requires you to enter a user name and password to connect to the Internet, enter them here and click Next. If you do not need to enter a user name and password to connect to the Internet, click Skip.
Figure 15 PPPoE
| 37 |
NSA320 User’s Guide | |
|
|