Chapter 18 Product Specifications
Table 117 Physical Features (continued)
Power Button | Press the Power button for one second to turn it on. |
| Turn off the NSA before unplugging it. |
| Press the Power button for 3 seconds until you hear |
| one beep, then release it. The NSA goes starts to |
| shutdown its software and turns off. |
| Press the Power button for 5 seconds until you hear |
| two beeps, then release it. The NSA turns off |
| immediately. |
|
|
COPY/SYNC Button | The COPY/SYNC button is used to copy or sync data from |
| the NSA to a compatible external (USB) storage device or |
| from the external (USB) storage device to the NSA. |
| Press the COPY/SYNC button to copy data from Public |
| folder (default) of the NSA. Use the Web Configurator to |
| configure the folder locations for the COPY/SYNC function. |
| During the data transfer, the COPY LED blinks and stops |
| when the transfer is complete. |
| If you want to sync the data in the NSA with the external |
| (USB) storage device, press the COPY/SYNC button until |
| you hear one beep. |
| If the COPY LED turns red, an error has occurred and the |
| transfer is stopped. Press the COPY/SYNC button once and |
| the COPY LED turns green. |
|
|
RESET Button | Press the RESET button until you hear one beep then |
| release it to reset the NSA’s IP address and password to the |
| default values. |
| Press the RESET button until you hear two beeps. After the |
| second beep, continue pressing the button for five more |
| seconds, then release it. You will hear three quick beeps |
| after you release the button. This resets the NSA to the |
| factory default configuration. All settings you have |
| configured on the NSA, including IP address, password, user |
| accounts, groups, and so on will be reset to the factory |
| defaults. |
| The reset process does NOT affect the volume settings, nor |
| data stored on the NSA. |
|
|
374 |
| |
NSA320 User’s Guide |
| |
|
|
|