Omni 56K II and Omni 56K Plus II User’s Guide

Verify (Enter the new supervisor password again)

********

OK

The command AT*Hn modifies the nth user password and the supervisor password on the screen for viewing. Again, the modem prompts you enter the supervisor password first.

The commands below enable different types and levels of security:

 

Table 3-6 Modem Security Function

 

 

CODE

DESCRIPTION

 

 

*G0

Disables security function.

 

 

*G1

Enables type 1 and level 1 security, with password check.

 

 

*G2

Enables type 1 and level 2 security, with password check and callback.

 

 

*G3

Enables type 1 and level 1 security, with password check.

 

 

*G4

Enables type 1 and level 2 security, with password check and callback.

 

 

*G5

Enables type 2 and level 2 security, with password check and callback,

 

remote site enters the callback number.

Before the security type or level can be changed, the modem requires thesupervisor password.

For type 2 security, the remote site is prompted to enter the user password. A maximum of 3 tries in 40 seconds is allowed. If a correct password is not entered within this time limit, the modem disconnects. If the remote site needs to enter the callback number, it will be prompted to do so.

Specifications and Functions

3-11