Omni 56K II and Omni 56K Plus II User’s Guide

COMMAND

DESCRIPTION

VALUE

 

 

 

 

Indicates that a document is available for polling.

n=1

 

 

 

+FMDL?

Request the DCE model.

 

 

 

 

+FMFR?

Request the DCE manufacturer.

 

 

 

 

+FMINSP=n

Minimum phase C speed parameter.

 

 

 

 

 

2400 bps.

n=0

 

 

 

 

4800 bps.

n=1

 

 

 

 

7200 bps.

n=2

 

 

 

 

9600 bps.

n=3

 

 

 

 

12000 bps.

n=4

 

 

 

 

14400 bps.

n=5

 

 

 

+FPHCTO=

DTE Phase C response time-out:

0-255

<value>

Determines how long the DCE will wait for a command after reaching the

 

 

end of data when transmitting in Phase C.

 

 

<value>=0 to 255; 100 ms units.

 

 

 

 

+FPTS=n

Page transfer status

 

 

 

 

 

Received page status - good.

n=1

 

 

 

 

Received page status - bad; retrain requested.

n=2

 

 

 

 

Received page status - good; retrain requested.

n=3

 

 

 

 

Received page status - bad; procedure interrupt requested.

n=4

 

 

 

 

Received page status - good; procedure interrupt requested.

n=5

 

 

 

+FREL=n

Phase C received EOL alignment:

 

 

 

 

 

The EOL patterns are bit aligned as received.

n=0

 

 

 

 

The last received bits of EOL patterns are byte aligned by the DCE, with

n=1

 

necessary zero fill bits inserted. Refer to TIA PN-2388 for details.

 

 

 

 

+FREV?

Request the DCE revision identification.

 

 

 

 

+FSPL=n

"Enable polling" command:

 

 

 

 

 

Disable polling.

n=0

 

 

 

 

Enable polling.

n=1

 

 

 

5-16

Command Sets