|
| Omni 56K II and Omni 56K Plus II User’s Guide |
|
|
|
|
|
| RESPONSE CODE | DESCRIPTION |
|
|
|
|
|
| <DLE>u | Transmission Buffer Underrun. The DCE reports this code if the DEC’s buffer |
|
|
| becomes empty without first receiving a <DLE><ETX> command. |
|
|
|
|
|
| <DLE><ETX> | End of stream |
|
|
|
|
|
5.6S-Register Descriptions
In most
5.6.1Basic S-Registers "ATSn=x"
Table 5-15 Basic S-Registers "ATSn=x"
COMMAND | FUNCTION & DESCRIPTION | REF. |
|
|
|
S0= | Sets the number of rings on which the modem will answer. A value of 0 disables | +000 |
|
| |
|
|
|
S1= | Counts and stores the number of rings from an incoming call. | +000 |
|
|
|
S2= | Defines the escape code character, default ' +' (43 dec.). A value of | +043 |
| the escape code. |
|
S3= | Defines the ASCII Carriage Return. | +013 |
|
|
|
S4= | Defines the ASCII Line Feed. | +010 |
|
|
|
S5= | Defines the ASCII Backspace key. A value of | +008 |
| delete function. |
|
S6= | Sets the number of seconds the modem waits before dialing if ' X0' or ' X1' is | +003 |
| selected. If a setting of ' X2,' 'X7' is selected; the modem will dial as soon as it detects |
|
| a dial tone. This register also sets the |
|
| wait for the dial tone. (See also S41b4) |
|
S7= | Sets duration, in number of seconds modem waits for a carrier. | +060 |
|
|
|
S8= | Sets duration, in seconds, for pause (,) option in Dial command and pause between | +002 |
| command |
|
|
|
|
S9= | Sets duration, in tenths of a second of remote carrier signal before recognition. | +006 |
| (Ignored if in |
|
S10= | Sets duration, in tenths of a second, that the modem waits after the carrier is lost | +007 |
| before hanging up. |
|
|
|
|
Command Sets |